{
 "currentVersion": 10.91,
 "cimVersion": "2.9.0",
 "serviceDescription": "Statewide elevation contours for all 100 NC counties. Contours are based on 20 foot DEM grid cells generated from LIDAR.ntity_and_Attribute_Information:  Detailed_Description:    Entity_Type:      Entity_Type_Label: Contour lines      Entity_Type_Definition: Contour lines for all of NC. Contour interval is 2 feet.      Entity_Type_Definition_Source: NC DOT - GIS Unit    Attribute:      Attribute_Label: Z_Feet      Attribute_Definition: Identifies elevation in feet.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Elevations differ by contour line.    Attribute:      Attribute_Label: FIPS      Attribute_Definition: Federal Information Processing Standard county code.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Codes differ by county.    Attribute:      Attribute_Label: LocGroup      Attribute_Definition: Block identifier used during processing.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Codes differ by contour line.    Attribute:      Attribute_Label: LocXY      Attribute_Definition: Block identifier used during processing.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Codes differ by contour line.    Attribute:      Attribute_Label: BaseContou      Attribute_Definition: Base contour line in feet.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 2          Enumerated_Domain_Value_Definition: The 2 foot base contour. To display 2 foot contour interval BaseContou values 4, 20, and 100 must also be displayed.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 4          Enumerated_Domain_Value_Definition: The 4 foot base contour. To display 4 foot contour interval BaseContou equal to 20 and 100 must also be displayed.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 20          Enumerated_Domain_Value_Definition: The 20 foot contour. To display 20 foot contour interval BaseContou equal to 100 must also be displayed.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 100          Enumerated_Domain_Value_Definition: The 100 foot base contour. Display only this BaseContou value to display 100 foot contour interval.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Measurement_Frequency: As needed    Attribute:      Attribute_Label: Shape_Leng      Attribute_Definition: Length of contour line in feet.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Lines differ in length.",
 "mapName": "Natural",
 "description": "Statewide elevation contours for all 100 NC counties. Contours are based on 20 foot DEM grid cells generated from LIDAR.ntity_and_Attribute_Information:  Detailed_Description:    Entity_Type:      Entity_Type_Label: Contour lines      Entity_Type_Definition: Contour lines for all of NC. Contour interval is 2 feet.      Entity_Type_Definition_Source: NC DOT - GIS Unit    Attribute:      Attribute_Label: Z_Feet      Attribute_Definition: Identifies elevation in feet.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Elevations differ by contour line.    Attribute:      Attribute_Label: FIPS      Attribute_Definition: Federal Information Processing Standard county code.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Codes differ by county.    Attribute:      Attribute_Label: LocGroup      Attribute_Definition: Block identifier used during processing.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Codes differ by contour line.    Attribute:      Attribute_Label: LocXY      Attribute_Definition: Block identifier used during processing.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Codes differ by contour line.    Attribute:      Attribute_Label: BaseContou      Attribute_Definition: Base contour line in feet.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 2          Enumerated_Domain_Value_Definition: The 2 foot base contour. To display 2 foot contour interval BaseContou values 4, 20, and 100 must also be displayed.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 4          Enumerated_Domain_Value_Definition: The 4 foot base contour. To display 4 foot contour interval BaseContou equal to 20 and 100 must also be displayed.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 20          Enumerated_Domain_Value_Definition: The 20 foot contour. To display 20 foot contour interval BaseContou equal to 100 must also be displayed.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Enumerated_Domain:          Enumerated_Domain_Value: 100          Enumerated_Domain_Value_Definition: The 100 foot base contour. Display only this BaseContou value to display 100 foot contour interval.          Enumerated_Domain_Value_Definition_Source: NC DOT - GIS Unit      Attribute_Measurement_Frequency: As needed    Attribute:      Attribute_Label: Shape_Leng      Attribute_Definition: Length of contour line in feet.      Attribute_Definition_Source: NC DOT - GIS Unit      Attribute_Domain_Values:        Unrepresentable_Domain: Lines differ in length.",
 "copyrightText": "LIDAR data is maintained by the Flood Mapping Program. Elevation products generated by NCDOT-GIS Unit. Data made available by the NC Center for Geographic Information and Analysis, through NC OneMap.",
 "supportsDynamicLayers": true,
 "layers": [
  {
   "id": 5,
   "name": "Topography",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 14400,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline",
   "supportsDynamicLegends": true
  }
 ],
 "tables": [],
 "spatialReference": {
  "wkid": 102719,
  "latestWkid": 2264,
  "xyTolerance": 0.00229879840956416,
  "zTolerance": 2,
  "mTolerance": 0.001,
  "falseX": -121841900,
  "falseY": -93659000,
  "xyUnits": 3.6365718124241434E7,
  "falseZ": 0,
  "zUnits": 1,
  "falseM": -100000,
  "mUnits": 10000
 },
 "singleFusedMapCache": false,
 "initialExtent": {
  "xmin": 1346753.0025753453,
  "ymin": 564911.6924177334,
  "xmax": 1348268.6275753453,
  "ymax": 567502.3174177334,
  "spatialReference": {
   "wkid": 102719,
   "latestWkid": 2264,
   "xyTolerance": 0.00229879840956416,
   "zTolerance": 2,
   "mTolerance": 0.001,
   "falseX": -121841900,
   "falseY": -93659000,
   "xyUnits": 3.6365718124241434E7,
   "falseZ": 0,
   "zUnits": 1,
   "falseM": -100000,
   "mUnits": 10000
  }
 },
 "fullExtent": {
  "xmin": 1268502.3859862536,
  "ymin": 515513.39075399935,
  "xmax": 1425662.6927280128,
  "ymax": 616762.1223112494,
  "spatialReference": {
   "wkid": 102719,
   "latestWkid": 2264,
   "xyTolerance": 0.00229879840956416,
   "zTolerance": 2,
   "mTolerance": 0.001,
   "falseX": -121841900,
   "falseY": -93659000,
   "xyUnits": 3.6365718124241434E7,
   "falseZ": 0,
   "zUnits": 1,
   "falseM": -100000,
   "mUnits": 10000
  }
 },
 "datesInUnknownTimezone": false,
 "minScale": 14400,
 "maxScale": 0,
 "units": "esriFeet",
 "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP",
 "documentInfo": {
  "Title": "C:\\Users\\gisadmin\\AppData\\Local\\Temp\\2\\ArcGISProTemp18952\\53220a52-6f7a-4c83-bb5f-b19900ccf5c6\\Untitled.aprx",
  "Author": "",
  "Comments": "",
  "Subject": "",
  "Category": "",
  "AntialiasingMode": "None",
  "TextAntialiasingMode": "Force",
  "Version": "2.9.0",
  "Keywords": "Topo,Topography,Contours"
 },
 "supportsQueryDomains": true,
 "capabilities": "Map,Query,Data",
 "supportedQueryFormats": "JSON, geoJSON, PBF",
 "exportTilesAllowed": false,
 "referenceScale": 0.0,
 "supportsDatumTransformation": true,
 "archivingInfo": {"supportsHistoricMoment": false},
 "supportsClipping": true,
 "supportsSpatialFilter": true,
 "supportsTimeRelation": true,
 "supportsQueryDataElements": true,
 "maxRecordCount": 2000,
 "maxImageHeight": 4096,
 "maxImageWidth": 4096,
 "supportedExtensions": "",
 "serviceItemId": "609de2a2650d401a9884a27ef9b9757b"
}